XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Progressive springs 2.5-2.8 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19445 |
Page 1 of 1 |
Author: | Tinaanit [ Tue Nov 29, 2016 21:31:46 ] |
Post subject: | Progressive springs 2.5-2.8 |
The word is put on top or down |
Author: | Skiddins [ Wed Nov 30, 2016 03:34:33 ] |
Post subject: | Re: Progressive springs 2.5-2.8 |
Doesn't matter |
Author: | Tinaanit [ Fri Dec 02, 2016 21:45:52 ] |
Post subject: | Re: Progressive springs 2.5-2.8 |
Not one side is go soft first than hard,and other side is go hard than soft? |
Author: | Skiddins [ Sat Dec 03, 2016 13:35:15 ] |
Post subject: | Re: Progressive springs 2.5-2.8 |
It won't matter as the side that is softer will compress first no matter which way up the spring is fitted ![]() |
Author: | beale [ Sun Dec 04, 2016 01:33:43 ] |
Post subject: | Re: Progressive springs 2.5-2.8 |
I always put numbers at the bottom it's easier to check when fitted to the chassis I find. |
Author: | Tinaanit [ Mon Dec 05, 2016 22:11:31 ] |
Post subject: | Re: Progressive springs 2.5-2.8 |
Thanks all |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |