XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Rear battery stop T4 17 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19405 |
Page 1 of 1 |
Author: | Mijo-dk [ Sat Oct 01, 2016 06:30:42 ] |
Post subject: | Rear battery stop T4 17 |
Well , got my new car build last night , like all new parts , BUT Seems like there has been a mistake with the rear battery stop on the inside against the belt. If you use the flex options you can not place the optional stop with the left servo mount and some shims. You can also not use the nut as on all the previus T4 cars as the hole has not been drilled in the chassis. I have used the speedo capasitor placed abow the belt , so it placed between the battery and the speedo. The front one on the right servo mount works Great. Did I miss something in the build or is it a mistake? |
Author: | Skiddins [ Sat Oct 01, 2016 16:55:05 ] |
Post subject: | Re: Rear battery stop T4 17 |
I don't have the new car yet. But I have run that centre link on the '16. I put a nut through the hole that's almost under the belt to act as the rear battery stop. |
Author: | Mijo-dk [ Sat Oct 01, 2016 17:31:16 ] |
Post subject: | Re: Rear battery stop T4 17 |
Hi As you can see on picture , that hole is not on the 17 car Well , picture comes later , |
Author: | robbie dodge [ Mon Oct 03, 2016 13:56:15 ] | ||
Post subject: | Re: Rear battery stop T4 17 | ||
Attached is a pic of a friend's T4'17 that he is about to race at IIC this week. Seems to be a decent solution
|
Author: | Mijo-dk [ Mon Oct 03, 2016 14:02:45 ] |
Post subject: | Re: Rear battery stop T4 17 |
Agree BUT then you remove some flex because of the battery stop. Well , lets see some more ideas or maybe a reply from Marin Hudy , i think a pladtic stop of some kind using one or 2 of the flex holes without touching the flex bar |
Author: | Skiddins [ Mon Oct 03, 2016 15:01:07 ] |
Post subject: | Re: Rear battery stop T4 17 |
What about using the optional adjustable lipo battery stops, and puting the rear 'L' bracket facing inwards instead? Scrap that, would foul on the layshaft mount In that case, I might be going with the 'piece of carbon Shoe Goo'd' to the chassis' |
Author: | Skiddins [ Mon Oct 03, 2016 15:04:02 ] |
Post subject: | Re: Rear battery stop T4 17 |
This is my X12, to stop the lipo moving forward but you get the idea; |
Author: | Racing27 [ Tue Oct 04, 2016 21:36:59 ] |
Post subject: | Re: Rear battery stop T4 17 |
Author: | Skiddins [ Wed Oct 05, 2016 03:06:43 ] |
Post subject: | Re: Rear battery stop T4 17 |
Author: | Mijo-dk [ Wed Oct 05, 2016 11:29:49 ] |
Post subject: | Re: Rear battery stop T4 17 |
Hi Skiddins Looking good , have you just super-clued the carbon piece on the chassis ?? Some of the danish drivers have used a 5g weight from balancing a car-wheel. Lets hope that there will be a new part to be mounted on the chassis thanks Michael |
Author: | Skiddins [ Wed Oct 05, 2016 14:59:15 ] |
Post subject: | Re: Rear battery stop T4 17 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |