XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XRAY T4 2016 - I want to use 64 pitch in my T4 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19320 |
Page 1 of 1 |
Author: | Refsiul22 [ Mon May 09, 2016 23:57:52 ] |
Post subject: | XRAY T4 2016 - I want to use 64 pitch in my T4 |
Hi guys, I'm currently building my T4'16 and was wondering.... Kit comes with 48pitch #84 teeth, but I would like to run 64pitch. What would be more or less the equivalent size (same diameter for example) for a 64pitch Spur that I should buy? Read somewhere else (as a rule of thumb) to divide 48pitch by 0.75 to get the approx. 64pitch Spur. For example, (84/ 0.75) = 112 teeth. Is that reasonable? Will it fit into my T4? My target FDR is between 5.0 - 5.5. Please comment below... Thanks! |
Author: | beale [ Wed May 11, 2016 08:20:43 ] |
Post subject: | Re: XRAY T4 2016 - I want to use 64 pitch in my T4 |
Yes that would be right for the spur, FDR / IR = R Spur / R = Pinion 5.5 / 1.9 = 2.89 112 / 2.89 = 38 ish |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |