Without knowing for sure I would assume blinky yes
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY Event - Setup Help for Cotswold https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19315 |
Page 1 of 1 |
| Author: | babaknt [ Tue May 03, 2016 23:02:06 ] |
| Post subject: | XRAY Event - Setup Help for Cotswold |
Hi All I'll be joining the Xray Event at Cotswold in June and will be running 13.5 Boosted for the first time. My question relates to FDR and timing - Using my LRP X20 13.5 Stock timed at 30 what FDR would I be looking at? It seems 5.5 should be very close but would welcome any opinion. Thanks B |
|
| Author: | Olly Jefferies [ Wed May 04, 2016 08:13:20 ] |
| Post subject: | Re: XRAY Event - Setup Help for Cotswold |
Hey I have very little experience of 13.5 but for Lrp motor 5.5 ratio I think would be too high. I think last time I ran 13.5 outdoor I ran closer to 6.5 to 7 overall ratio. If you start with this we can then take a look at your car in the day and guide you |
|
| Author: | babaknt [ Wed May 04, 2016 13:09:34 ] |
| Post subject: | Re: XRAY Event - Setup Help for Cotswold |
Great thanks Olly. Good thing I asked as otherwise might have overheated the engine. The X20 manual does state ideal FDR for 13.5T TC to be 5.5 but I guess thats for Blinky? |
|
| Author: | Olly Jefferies [ Sat May 07, 2016 09:19:00 ] |
| Post subject: | Re: XRAY Event - Setup Help for Cotswold |
Without knowing for sure I would assume blinky yes
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|