| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY T4 2015 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19213 |
Page 1 of 1 |
| Author: | Kent [ Mon Dec 21, 2015 17:13:39 ] |
| Post subject: | XRAY T4 2015 |
Hello, I’ve a problem with the eccentric bushings. Do you have a list with all possibilities? With this eccentric bushings you can adjust rear squat, rear toe-in, rear roll center and rear track-width. So I want to have two degrees rear toe-in, rollcenter at RR down and FR high. The T4 2013 and the T3 are very simple to adjust, T4 2015 ist a little bit complicated form e. Can you help me? Thanks. Chris |
|
| Author: | robbie dodge [ Mon Dec 21, 2015 17:30:00 ] |
| Post subject: | Re: XRAY T4 2015 |
Hi Chris, There should be an image in the manual that shows the possibilities. From what you're describing it sounds like you want the .5 insert with the dot in the corner to be down and in on the rear/rear mount, and the same insert with the dot up and out on the front/rear mount. Edit: I found on page 14 of the manual there is an image displaying the possible settings, though it doesn't provide detailed info. Basically .5 on the insert is approximately equal to .5 degree, and 1 is approximately 1 degree. So by doing the above you should end up with about 2* rear toe and about 1* of rear anti-squat. |
|
| Author: | Kent [ Tue Dec 22, 2015 09:34:41 ] |
| Post subject: | Re: XRAY T4 2015 |
Thanks for your help. Yours Chris |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|