XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Steering problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19212 |
Page 1 of 1 |
Author: | spotlessdragon [ Mon Dec 21, 2015 15:33:56 ] |
Post subject: | Steering problem |
How can I get more mid to exit corner steering on my T4 16 I have a basic kit carpet setup with two degrees of rear camber and 1 and a half degrees of front I am using grip 28s and a speed 6 body.... Will a different body help me ?? |
Author: | robbie dodge [ Mon Dec 21, 2015 15:53:16 ] |
Post subject: | Re: Steering problem |
If you want more steering, and your car isn't tippy you could try increasing front camber to 2*. Also, you may consider removing some rear toe by using the .5 or 1 eccentric with the dot towards the center of the car on the rear/rear arm mount. Less rear toe & narrower rear track width should help remove some rear grip, especially middle & out. |
Author: | Olly Jefferies [ Thu Dec 24, 2015 14:46:48 ] |
Post subject: | Re: Steering problem |
Hey, you can try laying down the rear shock or using a thicker diff oil. My car at the recent ews was good, try this set up also. Oj |
Author: | spotlessdragon [ Fri Dec 25, 2015 14:02:06 ] |
Post subject: | Re: Steering problem |
hi olly i watched your final and your car looked very good .... better than alexanders car as it seemed like it was easy to make a gap on him i wonder how this setup will work on a 17.5 motor did you try the alu chassis and why did you go for the carbon in the end thanks gary |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |