XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
suspension bushings: basic question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19156 |
Page 1 of 1 |
Author: | lorenzoneri [ Mon Oct 26, 2015 10:16:30 ] |
Post subject: | suspension bushings: basic question |
Hi all, sorry for my very basic question, but I'm playing with touring car from one year. I'm using a T4 2015 on asphalt. The suspension bushings must be set equal for both rear and front parts of each suspension? Thank you in advance for the clarification. Best Hobby to all, Lorenzo |
Author: | Olly Jefferies [ Mon Oct 26, 2015 10:46:07 ] |
Post subject: | Re: suspension bushings: basic question |
Hi, The bushing do not need to be equal for the front or rear of the car. They can be positioned many different ways to change the angle of the hinge pin, toe in, toe out, anti dive, anti squat and so on, but they must be equal left and right. Check through some of the team drivers set ups and you will see we run many different combinations. Hope this helps Oj |
Author: | lorenzoneri [ Mon Oct 26, 2015 14:28:54 ] |
Post subject: | Re: suspension bushings: basic question |
Thank you, so, it is not needed to use the same bushing for the two extremity of each hinge pin! I understand correctly? Best Regards, Lorenzo |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |