XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Spool Front, Chatter https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1910 |
Page 1 of 1 |
Author: | dmayhew25 [ Mon Jul 04, 2005 07:02:42 ] |
Post subject: | Spool Front, Chatter |
Author: | ben [ Mon Jul 04, 2005 12:32:18 ] |
Post subject: | |
Author: | polesitter61 [ Mon Jul 04, 2005 16:59:58 ] |
Post subject: | |
Another thing to look for when running a spool is wear on the plastic blades that are the end of the front CV shafts. Mine only last about two full race weekends with a 19t motor before they become sloppy or just plain wore out. |
Author: | darren styles [ Mon Jul 04, 2005 21:24:04 ] |
Post subject: | |
Ifound when i put the spool together, i made sure the slot for the driveshafts lined up the same on each side. You will get a little bit of chatter still as you are trying to make the car do something it dosnt want too. |
Author: | dmayhew25 [ Mon Jul 04, 2005 21:43:33 ] |
Post subject: | |
Thanks, I knew there would be some chatter but this much would cause my car to spin randomly. Just double checking and it did it so much it caused a cvd to bend. I will try aligning my shafts to see if this helps. Thanks for all the help. DM |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |