| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| PPS System https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19099 |
Page 1 of 1 |
| Author: | Italdesign [ Wed Jul 29, 2015 11:11:54 ] |
| Post subject: | PPS System |
Hello, What i must observe for the assembly for the PPS System ? When i push slowly the piston up and down the shell come little bit out and i must push back in. How bleed the Shocks with PPS System ? Thanks for Help Greets |
|
| Author: | robbie dodge [ Wed Jul 29, 2015 17:13:18 ] |
| Post subject: | Re: PPS System |
When I did mine I just held my thumb slightly over the edge of the shock body to help keep the sleeve in place. |
|
| Author: | DaleBurr [ Thu Jul 30, 2015 09:52:00 ] |
| Post subject: | Re: PPS System |
I always bleed my shocks via the bottom cap, which I guess will help even more with the PSS inserts. |
|
| Author: | Italdesign [ Tue Aug 04, 2015 11:20:53 ] |
| Post subject: | Re: PPS System |
Thanks for Help ! |
|
| Author: | MikeA [ Fri Aug 28, 2015 18:01:09 ] |
| Post subject: | Re: PPS System |
My next race will be on carpet.It's a small,technical, high grip track.I had good results last winter with "Hagberg's starting DHI Setup " even though I used a carbon Chassis.My question :is the PPS System only for Asphalt?Just trying to save some Training time . Thanks for any help. P.S. Last winter ran 4-hole,1.1mm,450 cst in the Shocks. Mike |
|
| Author: | Skiddins [ Sat Aug 29, 2015 11:25:37 ] |
| Post subject: | Re: PPS System |
No, I've found it good on high grip carpet. Try 450 in the PSS shocks |
|
| Author: | MikeA [ Sat Aug 29, 2015 12:25:30 ] |
| Post subject: | Re: PPS System |
Thanks for your reply,Skiddins.I've got 400er in my PSS shocks at the the moment.Going to start with that. Mike. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|