ร่วมเล่นสนุกๆไปกับพวกเรา ได้ที่นี่
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Question for Alex, AOC Setup Rear ARB and ARS https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19092 |
Page 1 of 1 |
| Author: | DamianW [ Wed Jul 08, 2015 05:57:29 ] |
| Post subject: | Question for Alex, AOC Setup Rear ARB and ARS |
Hi Alex, In your AOC setup sheet, the setup had ARS with a 1.5mm rear ARB. Can you explain reason for the 1.5mm ARB, is this related to the ARS? Have you or any of the team worked out when ARS is the better choice as when I have tried ARS the car was slightly faster but less consistent. Thanks Damian |
|
| Author: | kea248 [ Thu Jul 16, 2015 11:51:53 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
| ร่วมเล่นสนุกๆไปกับพวกเรา ได้ที่นี่ |
|
| Author: | DamianW [ Fri Jul 31, 2015 05:57:58 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
Bump. |
|
| Author: | Skiddins [ Fri Jul 31, 2015 10:53:10 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
| Author: | DamianW [ Sat Aug 01, 2015 11:07:57 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
Thanks that is helpful for the ARB and appears to be independent of the ARS. A guide tips for ARS would also be appreciated. So far I have found if the track is bumpy ARS doesn't work well but on flat tracks I have found ARS to be slightly faster but less consistent. I have used ARS configured that toe in increases as the rear suspension is compressed. |
|
| Author: | Hagberg [ Sat Aug 15, 2015 00:41:29 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
| Author: | DamianW [ Sat Aug 15, 2015 08:14:36 ] |
| Post subject: | Re: Question for Alex, AOC Setup Rear ARB and ARS |
Thanks. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|