XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Question for Alexander Hagberg - rear toe https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19007 |
Page 1 of 1 |
Author: | Salkin [ Thu Mar 19, 2015 15:29:22 ] |
Post subject: | Question for Alexander Hagberg - rear toe |
A question for Alexander Hagberg. In some of your setup sheets, you have rear toe in specified as e.g. 2.2 or 2.7. How do you gain that. Thought using the inserts would change the toe in 0.5 increments. Thanks! |
Author: | Hagberg [ Thu Apr 02, 2015 01:59:06 ] |
Post subject: | Re: Question for Alexander Hagberg - rear toe |
Basically standard toe is more close to 3.3 degrees and not 3 as on previous models. If you decrease toe by adjusting suspension pin inserts by -0.5 then you will have approx 2.7 degrees of rear toe. If you go -0.5 further, you will have 2.2 degrees of rear toe (approx again). |
Author: | Salkin [ Thu Apr 02, 2015 09:46:51 ] |
Post subject: | Re: Question for Alexander Hagberg - rear toe |
OK, I understand, thanks for the reply. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |