XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Setup ESC LRP Flow Works team firmeware 5.4 motor stock https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=19001 |
Page 1 of 1 |
Author: | Betont1 [ Mon Mar 09, 2015 02:32:12 ] |
Post subject: | Setup ESC LRP Flow Works team firmeware 5.4 motor stock |
Hi I have an ESC LRP Flow WorksTeam already with the new firmware v5.4 Update - Stock Only special firmware, and now I use a motor Speed Passion V3 10.5. I would like if someone has a better setup, I do not perform well with what I'm using. The track where we run and asphalt and fast. Thank's |
Author: | Salkin [ Tue Mar 10, 2015 13:16:55 ] |
Post subject: | Re: Setup ESC LRP Flow Works team firmeware 5.4 motor stock |
You need a setup for the Flow or the T4? |
Author: | Betont1 [ Fri Mar 13, 2015 21:55:10 ] |
Post subject: | Re: Setup ESC LRP Flow Works team firmeware 5.4 motor stock |
The flow |
Author: | beale [ Fri Mar 13, 2015 22:36:26 ] |
Post subject: | Re: Setup ESC LRP Flow Works team firmeware 5.4 motor stock |
The motor may be your problem, see if you can find a +20 timing board for it or just get a later generation motor with more end bell timing, I am currently running G force 17.5 and found 40deg EBT and 4 FDR is punchy but creates too much heat but 3.6 and 35deg is cool and fast enough on straights |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |