XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3'12 issues https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18997 |
Page 1 of 1 |
Author: | Chris Lovely [ Wed Mar 04, 2015 20:31:20 ] |
Post subject: | T3'12 issues |
Been having issues with my brothers t3'12 chassis When trying to setup the steering there is lots of play coming from the steering And when setting toe it adjusts it by half a mil either side which doesn't help Whst can I do to sort this? Replace the servo saver with a horn? And shim the steering rack?? My next issue is that when setup evenly and correctly The car doesn't run straight I've changed driveshafts, diffs, hubs c hubs, pins, screws, changed servos etc The car runs off to the left Hinge pins seem straight so I'm unsure what to change Whether it be bulkheads or chassis All help appreciated |
Author: | beale [ Wed Mar 04, 2015 20:51:39 ] |
Post subject: | Re: T3'12 issues |
Is it all kit parts? Is it a genuine X-ray kit (have seen a clone that was nearly impossible to tell till you got hold of it then you knew and kit parts didn't fit properly) Steering posts/bearings Are the top hat bushes kit and present in the c hubs? |
Author: | Chris Lovely [ Wed Mar 04, 2015 21:07:09 ] |
Post subject: | Re: T3'12 issues |
Hi Yep all kit and all genuine xray parts There are updated parts on the car of which are all xray The bearings seem good, and the top hats are all in |
Author: | beale [ Wed Mar 04, 2015 21:57:13 ] |
Post subject: | Re: T3'12 issues |
Is it a used chassis? There is an amount of free play in the steering but not normally something you can't trim out with the transmitter, What is the rear like? Setup 3* toe (check shims) 1.5 -2* camber, springs matched? Sometimes handling effects are from opposite end is why I ask. Have you removed the wheels and placed the chassis on a known flat surface (I use the ceramic hob at home when missus is at work!!), this is to check and fix tweak issues that cause odd handling |
Author: | greyhead [ Fri Mar 06, 2015 01:06:11 ] |
Post subject: | Re: T3'12 issues |
check the top deck just next to the motor,they can crack and cause tweak on acceleration |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |