Hi everyone,
I have a question about my shock ball joints and my pivot balls on my T4 2015. I have read the manual very very closely and still I don't get it.
The situation how I have my shocks installed is:
Top part of the shock, shiny part pointed TOWARDS the pivot ball.
Bottom part of the shock, shiny part pointed AWAY from the pivot ball.
Now this; I try to move my ball joints freely over the pivot balls, but on the top part of the shock, the ball joint does not move freely. I mean by that, it some sort of "sits" at the base of the pivot ball. When I try to wiggle it, it has a restricted movement. But when I pull it out a little bit, the ball joint moves freely. It looks like it "clicks" into place when I don't pull the shock out.
(The worn tires are just there for other reasons...)
image-2015-03-03 (1).jpg [ 98.6 KiB | Viewed 2229 times ]
Is this normal what you see on the video?
If not, could anyone tell me what's wrong here?
Thanks in advance!