Can anyone help me ?
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Stock Setup Questions https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18976 |
Page 1 of 1 |
| Author: | Italdesign [ Sat Feb 07, 2015 23:24:41 ] |
| Post subject: | Stock Setup Questions |
Hello, Im Drive the Basic Setup from Jan. Here is the Setup. xform/index.php?act=view&ID=124&setup=t4_2015 Is a very good Setup and im think the car is easy and nice to drive. Only i have change two things. Rollcenter front i have change the inner shims on bulkhead from 2mm to 1mm and i have remove the four screws from top deck for more flex. Is already easy to drive. But i think the car is not enough fast i can change what i want but the lap time is the self. I think the car is "sluggish" its not so agile and i think its not "roll" nice. What i can change to make the car not so "sluggish" and to make faster ? Thx for Help and Tips ! Greets Patrick |
|
| Author: | Italdesign [ Mon Feb 09, 2015 12:04:31 ] |
| Post subject: | Re: Stock Setup Questions |
Can anyone help me ?
|
|
| Author: | greyhead [ Mon Feb 09, 2015 20:18:32 ] |
| Post subject: | Re: Stock Setup Questions |
what tyres do you race on?this makes quite a difference as to which set up you use |
|
| Author: | Italdesign [ Mon Feb 09, 2015 20:27:44 ] |
| Post subject: | Re: Stock Setup Questions |
Hi, thanks for Reply. Im use the same Tires that are use at ETS. The Ride Rex30 LT2. Thanks |
|
| Author: | beale [ Tue Feb 10, 2015 08:10:11 ] |
| Post subject: | Re: Stock Setup Questions |
What effect did removing 1mm of front shims give? What effect did removing the 4 screws give? Are you suffering from under steer? Did you try softer diff oil and softer rear springs as Jan commented? |
|
| Author: | Italdesign [ Tue Feb 10, 2015 08:47:34 ] |
| Post subject: | Re: Stock Setup Questions |
| Author: | Skiddins [ Tue Feb 10, 2015 11:45:16 ] |
| Post subject: | Re: Stock Setup Questions |
You could try adding the layshaft screw back in, and possibly the steering plate and post to make the car stay flatter and feel more 'reactive' |
|
| Author: | Italdesign [ Tue Feb 10, 2015 13:12:15 ] |
| Post subject: | Re: Stock Setup Questions |
What for Shock Settings do you prefeer for Stock Class ? 400 Oil with 1.1 ? I have see many Drivers there have Basic Shock Setup |
|
| Author: | Skiddins [ Tue Feb 10, 2015 14:30:36 ] |
| Post subject: | Re: Stock Setup Questions |
| Author: | Italdesign [ Wed Feb 11, 2015 14:29:10 ] |
| Post subject: | Re: Stock Setup Questions |
What you think about Shock Oil ?? 400 all around or 450 ? What i can change for more roll ? |
|
| Author: | Salkin [ Wed Feb 11, 2015 15:40:25 ] |
| Post subject: | Re: Stock Setup Questions |
Have you tried the kit setup, just as a reference point? It worked very well for us. The setup you link to differs not significantly from the general "trend" in other team driver setups. There are however some differences: Many run downstop 4.6/5.6, not the 4.8/5.8 in the setup sheet. Shims under shocks; most tends to have more shims. e.g. 4/1 front, 2/2 rear. Many runs no shock rebound, you have 20/50 rebound in Jan's setup. Rear diff oil is 6000 in Jan's setup, many run with thinner oils (e.g. 2000-5000). You could try to adjust these settings to see if that works better for you. Or try Mike Gosvig's latest stock carpet ETS setup, which is a setup that differs a little from Jan's setup: xform/index.php?act=view&ID=191&setup=t4_2015 |
|
| Author: | Italdesign [ Wed Feb 11, 2015 15:46:51 ] |
| Post subject: | Re: Stock Setup Questions |
| Author: | Skiddins [ Wed Feb 11, 2015 16:04:29 ] |
| Post subject: | Re: Stock Setup Questions |
| Author: | andrewd [ Thu Feb 12, 2015 00:31:31 ] |
| Post subject: | Re: Stock Setup Questions |
hi I'm running the basic carpet setup with the centre post and the car is awesome |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|