XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Martin Hudy setup for LRP Masters https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18951 |
Page 1 of 1 |
Author: | Salkin [ Wed Jan 21, 2015 11:08:58 ] |
Post subject: | Martin Hudy setup for LRP Masters |
Just saw Martin Hudy's recommended setup for the LRP Masters, which is a mod setup using the graphite chassis. It is really welcomed to see a team driver mod setup based on the graphite chassis. Hope Xray releases a similar one (mod, graphite chassis) for the ETS R2 in Germany. We are going and could use a little help ![]() |
Author: | Skiddins [ Wed Jan 21, 2015 11:45:21 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
There are quite a few guys going from the UK as well ![]() Come over and say hello ![]() |
Author: | Salkin [ Wed Jan 21, 2015 12:14:05 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
We will ![]() It is actually my 10 year old son who is driving (mod), I'm just his humble mechanic ![]() |
Author: | Skiddins [ Wed Jan 21, 2015 16:12:18 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
Unfortunately I'm my own mechanic, my results might be better if I wasn't ![]() |
Author: | Salkin [ Tue Jan 27, 2015 14:05:17 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
In Martin Hudy's LRP start setup, the eccentric bushings in the rear seems to add to the standard toe of 3 degree, but still the setup sheet states 3 degree for final toe in. Can someone please explain that to me. Martin's setup: xform/index.php?act=view&ID=165&setup=t4_2015 |
Author: | Martin Hudy [ Tue Jan 27, 2015 18:35:03 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
Salkin, sorry my mistake, it should be in the middle. I use 3 degree toe in. I already updated Regarding to ETS 2 starting set up, I will use the same as this one as I used it already on ETS rnd.1 and also DHI cup. |
Author: | Salkin [ Tue Jan 27, 2015 22:40:36 ] |
Post subject: | Re: Martin Hudy setup for LRP Masters |
Thank you very much. We tried your setup tonight at our track and it worked very well. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |