| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Xray T4 2013 with RX4 chassi https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18914 |
Page 1 of 1 |
| Author: | lugithelugman [ Wed Dec 10, 2014 14:39:07 ] |
| Post subject: | Xray T4 2013 with RX4 chassi |
Hi Guys I am new here and i have a few questions  I own a T4 2013 with an RX4 chassis. The car itself drives very smooth and nicely with a 4,5 T motor. Now my question: What part of the 2014 / 2015 are usefull to upgrade my T4 ? I allready have the X-Ray CVD´s,Alu Dual Servo Saver Arm and Graphite Steering Plate Set and the Low-friction Kevlar Drive Belts. thanks in advanced cheers lugi |
|
| Author: | grippgoat [ Fri Dec 12, 2014 11:48:19 ] |
| Post subject: | Re: Xray T4 2013 with RX4 chassi |
2015 style swaybar end links for easier detweaking. You can cut down the 13-14 swaybars to make them fit. You can use ARC parts if they're more readily available. You need the plastic ends that mount to the bar, ball studs with a long thread, and open ball cups like the 15 uses on the camber links. I upgraded my 14s to this style, and it's really nice. If you run large spurs, a 14 motor mount might be worthwhile, as it gives a lot more pinion clearance. The steering rack also has 8.5mm spacing instead of only 8mm on the 13. I have no idea if that's noticeable or worthwhile. But at a certain point it makes more sense to just buy the new car. -Mike |
|
| Author: | Hagberg [ Fri Dec 26, 2014 18:16:54 ] |
| Post subject: | Re: Xray T4 2013 with RX4 chassi |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|