| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Anti-roll bar height https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18839 |
Page 1 of 1 |
| Author: | QuickRick [ Tue Oct 21, 2014 19:29:01 ] |
| Post subject: | Anti-roll bar height |
Hi, can anybody explain me, why I should adjust the height of the anti-roll bar holders? What´s the effect off that? |
|
| Author: | beale [ Wed Oct 22, 2014 21:07:51 ] |
| Post subject: | Re: Anti-roll bar height |
Take your shocks and wheels off, support the chassis, lift 1 wishbone (LHR) as high as it will go, measure the height of the opposite wishbone(RHR) (lifted by roll bar) Do the reverse - lift the RHR and measure the the LHR the adjustment can be used to equalise roll bar action |
|
| Author: | QuickRick [ Thu Oct 23, 2014 14:10:07 ] |
| Post subject: | Re: Anti-roll bar height |
Thanks for answering. Now I know what to do. But one question. What is the effect, when both wishbones have different heights? I mean, how can I notice that? |
|
| Author: | DaleBurr [ Fri Oct 24, 2014 09:41:45 ] |
| Post subject: | Re: Anti-roll bar height |
I don't think anyone uses that as an adjustment. If you're good enough to feel that change, you should be giving us advice. |
|
| Author: | Danny Buck [ Fri Oct 24, 2014 23:30:54 ] |
| Post subject: | Re: Anti-roll bar height |
It's basically to ensure that the roll bar is acting on each side the same amount. De-tweaking more or less. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|