| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| xray t4,14 conversion kit https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18829 |
Page 1 of 1 |
| Author: | chachotu2 [ Thu Oct 09, 2014 13:02:35 ] |
| Post subject: | xray t4,14 conversion kit |
hello i have a `new´ xray 2014, you will release a 2015 conversion kit?? thanks. |
|
| Author: | brano [ Fri Oct 10, 2014 07:49:58 ] |
| Post subject: | Re: xray t4,14 conversion kit |
XRAY will not offer conversion set as there are too many new parts. If you have T4 2014 than you will need all these parts just to fit the ARS suspension in rear: 301137 chassis - 1x 303055 alu motor mount - 1x 303058 alu motor mount plate - 1x 303170 ARS rear arms – 2x 302369 hard c-hub 0° right - 1x 302370 hard c-hub 0° left - 1x 302291 steel bushing - 1x 302253 steering block – 2x 362650 ball end 6mm thread - 1x 362649 ball end 5mm thread - 1x 303212 alu turnbuckle - 1x 302663 ball joint - 1x 302201-O alu brace post – 1x 306203 alu servo mount - 1x 306231 graphite servo holder - 1x + screws and shims there are more of new parts in the T4 2015 - for more info check the presentation. |
|
| Author: | chachotu2 [ Fri Oct 10, 2014 16:54:37 ] |
| Post subject: | Re: xray t4,14 conversion kit |
thanks Bruno, i know... the new roll bar system with lower bulkheads, roll bars, composite mounts, balls... i think that is more cheaper buy the new one... but maybe i buy the new upper roll center mounts, at the end i don use it to much..... when will it be at the stores?? |
|
| Author: | brano [ Mon Oct 13, 2014 07:31:34 ] |
| Post subject: | Re: xray t4,14 conversion kit |
The new kits and also all spare parts were sent to all distributors so you have to check with your local hobby shop. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|