XRAY - Model racing cars

Hey guys.
I'm currently running the Xray basic carpet setup and I got really low grip with sorex 28, Im running a LTC-R body.

So I was wondering what setup i should use with sorex 28 on a really low grip carpet, mixed track?

Thanks!

The LTCR shell will give more steering which helps on asphalt, on carpet you really need. Speed 6 protoform.
Are others suffering with low grip?
Where do you have low grip especially - entry, mid, corner exit or straight line?
Understeer/oversteer?
What tyre prep do you do?

The Nosram additive is quite old now, still useable but there are better alternatives CS hi grip if you can use it, spider grip, SXT, AME.
Can you reduce the end points on your transmitter? Might be worth reducing your steering amount this calms the car down until grip comes up, also check rear belt tension is almost loose, front almost tight and try standing rear shocks up, only other thing I have done is remove roll bars but this rarely works for me

You can get more grip if you let the addittive more time in tyres, even use a plastic for put warmers at 60-80ºC. With the plastic you get wipe more late the addittive in tyres. Paper wipe to fast with warmers. With low grip you must soften maximum the tyres as possible for get grip in these conditions.

This is a good starting point for Sorex 28 on low to medium bite

xform/index.php?act=view&ID=26&setup=t4_2014

Thanks for the replies everyone.

Ive tried the the setup sheet and mazda speed6 and now i actually got more grip in the rear. Im going to make a new speed6 body and i was wondering how i should mount it to get more grip in the rear?

Thanks.