XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 13' front inboard toe out https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18826 |
Page 1 of 1 |
Author: | Nikolas Andriop [ Wed Oct 08, 2014 16:13:03 ] |
Post subject: | T4 13' front inboard toe out |
Hello. I want to try the front inboard toe out (arm sweep) on my car. I have read that i should put 0.5 shim each side at the ff blocks....Correct??? Also i have to take out the 1.0mm shim at the ackermann or not with the front inboard toe out ??? One last thing.... What is the effect of the rear hub with 1° degree toe-in Thanks!!! |
Author: | DaleBurr [ Wed Oct 08, 2014 18:50:52 ] |
Post subject: | Re: T4 13' front inboard toe out |
Yep that's correct, add 0.5mm to the FF hangers. That's pretty much the standard setup on the T4. I'd leave the ackerman shim in to start with so you can feel what the arm sweep does. No one ever runs outboard toe on the rear, so I don't think you'll get an answer to that one! |
Author: | Nikolas Andriop [ Wed Oct 08, 2014 18:57:56 ] |
Post subject: | Re: T4 13' front inboard toe out |
Thanks i will try it....... About rear hub i want to say 1 degree toe in my mistake.(I edit) |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |