XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 13' setup question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18817 |
Page 1 of 1 |
Author: | Nikolas Andriop [ Thu Oct 02, 2014 16:04:10 ] | |||
Post subject: | T4 13' setup question | |||
Hello...I am a new member at the forum!!!! Here is a pic from our local track Here is the setup sheet of my car My question is... the car is very stable and fast but in center of the track at the big closed turm the car understeet alot and i have to slowdown . What is your opinions Thanks!!
|
Author: | DaleBurr [ Fri Oct 03, 2014 09:45:00 ] |
Post subject: | Re: T4 13' setup question |
Looks like an on-power corner. The things giving you on-power understeer are: You've lowered the rear roll-centre on the wishbone hangers, try putting these back to kit. If it then oversteers on the other sections, go back to a solid front block to calm it down. You've got quite a lot of droop for the ride-height you're running. Try 0.5mm less all round (5.5f/4.5r). Try an LTC-R shell. The GX understeers and almost everyone finds the LTC-R faster on tarmac. |
Author: | Nikolas Andriop [ Fri Oct 03, 2014 14:34:34 ] |
Post subject: | Re: T4 13' setup question |
Thanks for the tips Also thinking to put graphite wishbone, hard rear hub and 52 shaft at the back I all ready bought ltcr body i have only to cut and paint it Thanks!!!! |
Author: | DaleBurr [ Fri Oct 03, 2014 15:41:25 ] |
Post subject: | Re: T4 13' setup question |
Author: | Nikolas Andriop [ Sun Oct 05, 2014 10:29:17 ] |
Post subject: | Re: T4 13' setup question |
Thanks so much i will try it very soon |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |