XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
ARS basic set up? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18812 |
Page 1 of 1 |
Author: | Mike1 [ Fri Sep 26, 2014 15:04:38 ] |
Post subject: | ARS basic set up? |
Hi can anyone from the team advise basic ARS setup? In particular I mean upper link shimming? Is it good start 1mm inner and 2 mm outer shimming? Thanks! |
Author: | Hagberg [ Sun Sep 28, 2014 20:58:09 ] |
Post subject: | Re: ARS basic set up? |
1 outer and 0 inner is a good starting point |
Author: | savo [ Sun Sep 28, 2014 23:44:41 ] |
Post subject: | Re: ARS basic set up? |
Hi Alex, What track width would you run when using the ARS setup on low to medium grip carpet. |
Author: | greyhead [ Mon Sep 29, 2014 23:38:33 ] |
Post subject: | Re: ARS basic set up? |
Author: | Skiddins [ Tue Sep 30, 2014 01:14:20 ] |
Post subject: | Re: ARS basic set up? |
Author: | greyhead [ Tue Sep 30, 2014 17:29:26 ] |
Post subject: | Re: ARS basic set up? |
Author: | Mike1 [ Thu Oct 02, 2014 06:52:20 ] |
Post subject: | Re: ARS basic set up? |
Thanks Alex! Would you please advise what is the difference of 0 inner, 1 outer compared to my original suggestion ( 2 mm outer and 1 mm inner)? Should I use kit ARS toe link 1 inner and 0 outer? Is there any quick guidance ready from the team how would the spacing affect the handling? I am clear that adding the spacers any site would decreace ( open) the toe under compression ... Understand it's up to personal preference, but.... Thanks! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |