XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Setup advise for small sized, high traction carpet track https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18781 |
Page 1 of 1 |
Author: | aktug78 [ Mon Aug 25, 2014 18:47:48 ] |
Post subject: | Setup advise for small sized, high traction carpet track |
Hi proffs., we race in North Cyprus, 6 xray drivers tried lots of things for increase rear traction but not satisfy enough. Do you have any setup suggestion for both 13.5 stock class and modifed with 5.5t motor?? Thank you; |
Author: | Skiddins [ Tue Aug 26, 2014 00:00:23 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
You really need to post a setup sheet so people can look at what you have now. |
Author: | aktug78 [ Tue Aug 26, 2014 17:09:53 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Thank you for reply Skiddins. Below my setups for mod and stock. What can provide more traction at the rear? Thanks xform/index.php?act=view&ID=440&setup=t4_2014 xform/index.php?act=view&ID=441&setup=t4_2014 |
Author: | Skiddins [ Tue Aug 26, 2014 17:46:20 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Swap the shims on the upper inner links, so 2mm at front and 1mm at rear. Wider rear track, use the +.5 blocks. Centre post instead of layshaft screws Other possibilities depending on how bad the problem is; Longer rear wheelbase Stand rear shocks one hole |
Author: | aktug78 [ Tue Aug 26, 2014 18:22:56 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Thank you again Skiddins, will try one by one on thursday and tell how it works regards |
Author: | greyhead [ Tue Aug 26, 2014 18:30:05 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
try a wider rear 0.5 each side makes a fair bit of difference |
Author: | aktug78 [ Tue Aug 26, 2014 19:34:11 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Thx, as i know from the Hagberg's application, raise upper link on the inside: roll center is lowered. raise upper link on the outside: the roll center is raised. Am i right? Regards |
Author: | Skiddins [ Wed Aug 27, 2014 10:24:35 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Author: | aktug78 [ Fri Aug 29, 2014 20:08:29 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Hey again, i used +.5 mm at the rear, and 400 cst oil in the rear and car is better now, only need little more exit corner traction Thank you all your helps |
Author: | andrewd [ Fri Aug 29, 2014 20:41:48 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
I ran indoor last night on a fresh set of sorex and the car was good but as always you want better so I tried the rear centre post and my god the car was planted I will post a setup sheet soon |
Author: | spotlessdragon [ Sun Aug 31, 2014 14:17:12 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Author: | andrewd [ Sun Aug 31, 2014 19:45:06 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
With I didn't try it without What effect would it have without |
Author: | spotlessdragon [ Mon Sep 01, 2014 19:54:07 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
not sure |
Author: | DaleBurr [ Tue Sep 02, 2014 10:13:51 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
I only ran the post and layshaft screws together once (by mistake), and the car was horrible. No traction or steering. The post on its own with the layshaft screws removed gives a good increase in stability and rear grip. This was outdoors (Bedworth). Maybe indoors running all the screws would work. |
Author: | donnie_p [ Tue Sep 02, 2014 21:48:48 ] |
Post subject: | Re: Setup advise for small sized, high traction carpet track |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |