| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Corner speed https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18753 |
Page 1 of 1 |
| Author: | Nt1Mase [ Sat Jul 26, 2014 21:29:46 ] |
| Post subject: | Corner speed |
My car seems to be slowing down in tight corners and feels sluggish in the chicanes. I feel I have to push hard to get it through the chicane with any pace. Any suggestions on how to free it up a bit ? Here it is in action : https://www.youtube.com/watch?v=Iq0OyMpCcbA (Was nervous in the first few laps) |
|
| Author: | Skiddins [ Sun Jul 27, 2014 01:22:00 ] |
| Post subject: | Re: Corner speed |
You need to fill out a setup sheet and post a link on here. Have you tried speaking to Tony Broad? |
|
| Author: | grippgoat [ Tue Jul 29, 2014 04:03:32 ] |
| Post subject: | Re: Corner speed |
Looks like understeer that you're pushing through with extra steering lock, causing sluggish behavior in the middle of the corner, and sloppy handling mid/exit when you get on the power. Keeping it simple, and not knowing anything about the setup, I'd try: - Lay down front shock or stand up rear (or both) to get more overall steering - Thicker front shock oil to get back the entry / transitional response |
|
| Author: | Nt1Mase [ Tue Jul 29, 2014 12:03:01 ] |
| Post subject: | Re: Corner speed |
Thanks for the replies. Sounds good Goat, I'll give it a go. |
|
| Author: | donnie_p [ Fri Aug 22, 2014 06:09:28 ] |
| Post subject: | Re: Corner speed |
| Author: | Ruben_qlc [ Mon Nov 10, 2014 01:27:16 ] |
| Post subject: | Re: Corner speed |
Hello. Try to use the top roll center eccentric buhsings positions. This will help you in chicane and corners reactions... even you will can apply throttle before. If you use this may have to lower downstops little bit. Or try to put your setup  I hope this help. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|