| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Thanks To the Xray Team @ ETS Hudy Arena https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18731 |
Page 1 of 1 |
| Author: | Skiddins [ Tue Jul 08, 2014 02:24:20 ] |
| Post subject: | Thanks To the Xray Team @ ETS Hudy Arena |
I'd like to thank the Xray team for their help at the ETS at the Hudy Arena. Particularly Alex Hagberg for putting up with all my questions, sorry  I never did manage to get my car to stop being loose despite trying many changes, but I had a lot of fun. Alex, on your setup sheet are those outer rear link shims correct, 1mm? Was the very low front roll centre to increase steering, make it more progressive or some other reason? Thank Skiddins |
|
| Author: | Mijo-dk [ Wed Jul 09, 2014 23:30:55 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
The outer 1mm shim is proberbly for the ARS. I have made is for my self from the Photos I have seen. Ran it thuesday and it felt very good. |
|
| Author: | Skiddins [ Thu Jul 10, 2014 02:45:21 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
No, I meant the 1mm on the rear hub carrier on the upper link |
|
| Author: | Mijo-dk [ Thu Jul 10, 2014 06:16:00 ] | |||
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena | |||
Hi Yes , thats also what I answered. If you have ARS you have some kind of C hub rear. And you can not have more than 2mm shim on upper link. See your front of the car. I have 1 mm on my ARS rear upper link outsite in the wheel. have now attacted pictures of ARS on my car
|
||||
| Author: | DaleBurr [ Thu Jul 10, 2014 09:58:34 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
That looks okay. Personally I prefer the ARS used at last years event... |
|
| Author: | greyhead [ Fri Jul 11, 2014 00:07:03 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
the nut cracker! |
|
| Author: | Hagberg [ Mon Jul 14, 2014 15:43:32 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
What's up Skiddins? Good to finally meet you. I used 1mm on top of the rear c-hub used together with the ARS system. |
|
| Author: | Skiddins [ Mon Jul 14, 2014 18:39:58 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
| Author: | andrewd [ Mon Jul 14, 2014 23:22:47 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
What is the make of spur gear shown in the picture |
|
| Author: | Mijo-dk [ Tue Jul 15, 2014 05:13:14 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
Hi It's a Panaracer spur , I dont find them better , they are the same as xray , just like the look |
|
| Author: | phillip46 [ Wed Jul 23, 2014 13:31:51 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
Hi.what c hub do u use on the back and to what degree do u set the rear tow.is it a standerd front arm on the back.just interested.cheers |
|
| Author: | Mijo-dk [ Thu Jul 24, 2014 21:50:59 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
| Author: | phillip46 [ Thu Jul 24, 2014 23:30:11 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
Thanks.if u dont mind.on the new little link, do you fit a washer under the inner mounting point an if so, how thick and how will the hight of the link affect the rear tow.do u know if xray will be selling a kit soon to do this.thanks |
|
| Author: | Mijo-dk [ Fri Jul 25, 2014 05:17:34 ] |
| Post subject: | Re: Thanks To the Xray Team @ ETS Hudy Arena |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|