| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Kicking out and bump steer https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18704 |
Page 1 of 1 |
| Author: | andrewd [ Mon Jun 09, 2014 19:27:50 ] |
| Post subject: | Kicking out and bump steer |
xform/index2.php?act=print&ID=348&setup=t4_2014 I have posted a link to my setup sheet from the weekend the issue that I had was that it would on power kick out on the rear only slightly but enough for you to lose your line Also what is the effect of bump steer Thanks Andrew |
|
| Author: | DaleBurr [ Tue Jun 10, 2014 12:58:06 ] |
| Post subject: | Re: Kicking out and bump steer |
Are you really running 6mm front and 5mm rear ride height? That could make for a very strange handling car. Either run the chassis flat or the front a touch lower. 5.8 front and 6.0 rear is a good starting point for Stafford. If it's still an issue after that try: Tighter front belt and looser rear Add shims between front shocks and tower (try 3 or 4mm) Solid front block Speed6 shell Thinner diff oil (might cause over-rotation mid-corner so last resort) |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|