| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Rear Toe-In Adjustment https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18675 |
Page 1 of 1 |
| Author: | Italdesign [ Mon May 26, 2014 11:37:01 ] |
| Post subject: | Rear Toe-In Adjustment |
Hello, How i can adjust the Rear Toe-In step by step ? In front rear i have the 1 Degrese Insert and in the rear rear the same. How much toe in is this ? Thanks for Help |
|
| Author: | Skiddins [ Mon May 26, 2014 11:56:28 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
If you have +1 in the RF blocks and standard dot in the RR block that is 2deg rear toe. Skiddins |
|
| Author: | Italdesign [ Mon May 26, 2014 14:09:54 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
How i can calculate this ? |
|
| Author: | halldor [ Mon May 26, 2014 15:03:15 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
The "base" setting (with both front/rear "0" inserts) is 3° toe. The inserts are 0.5mm/0.5° or 1mm/1° offsets (from the center "0" position). From there it's just simple arithmetic. |
|
| Author: | greyhead [ Mon May 26, 2014 22:20:36 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
| Author: | sonic2 [ Mon Jun 02, 2014 10:49:25 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
I am new to tuning/setting up the T4 '13 For now I am using kit toe settings. 1) Is it possible to get more than 3 degrees rear toe in? I race on foams and I understand more rear toe in gives less on power steering. However, because the grip of foams I can possibly sacrifice some of the on power steering and use excessive rear toe in so I can slow the car down and steer at the same time. Hopefully my understanding is correct and I have not just confused everyone 
|
|
| Author: | greyhead [ Mon Jun 02, 2014 20:16:46 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
on the 13 you add shims behind the mounts to widen or adjust toe inmy sons car has a 1mm shim on the rear front mounts and about 1.75 on the rear rear,this gives 3 degrees,so if you want more just add more shims to the rear mounts |
|
| Author: | sonic2 [ Tue Jun 03, 2014 10:26:41 ] |
| Post subject: | Re: Rear Toe-In Adjustment |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|