| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Need advice on Motor pinion on T4 2014 with stock spur https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18674 |
Page 1 of 1 |
| Author: | myt42014 [ Mon May 26, 2014 09:00:11 ] |
| Post subject: | Need advice on Motor pinion on T4 2014 with stock spur |
Hey guys, I need your advice. Im the new owner of T4 2014, i would like to ask which motor pinion should i use for my T4. What i will be running is Hobbywing Ezrun 5.5T combo with 60A esc. Currently in my hand i have Tamiya 24T and 25T Pinion. Thx |
|
| Author: | greyhead [ Mon May 26, 2014 10:19:25 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
when i ran a 5.5t on a large outdoor track i used a 26,for smaller tracks a 24/25 should be ok,you can add boost as required |
|
| Author: | beale [ Mon May 26, 2014 21:45:45 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
You mention EZrun? Sensorless? You need to do some speed runs then hold the motor for 5 seconds. If it's too hot gear down on your pinion |
|
| Author: | myt42014 [ Tue May 27, 2014 08:54:03 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
yes im using Ezrun and its sensorless... i have tried with 20T tamiya pinion and stock 84T spur... the noise coming from the car is weird.. when i take out the motor and spin the wheels.. its smooth...no noise any clue? |
|
| Author: | zzoebl [ Tue May 27, 2014 10:47:49 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
Doesn't Tamiya use their own pitch system, .4 and .6, not 48 and 64p? They look very similar. I would try to borrow a pinion you know is 48p and see if the issue goes away. |
|
| Author: | myt42014 [ Tue May 27, 2014 13:51:12 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
how do i check my Tamiya pinion is what pitch? |
|
| Author: | team n.o.m.a.d [ Wed May 28, 2014 11:18:07 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
Change pinion as tamiya do use their own pitch |
|
| Author: | myt42014 [ Thu May 29, 2014 16:05:32 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
update: i got mine installed with 19T pinion... run for few times on track but the motor is not warm enough... |
|
| Author: | promodvette [ Wed Jun 04, 2014 07:04:10 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
| Author: | myt42014 [ Thu Jun 05, 2014 02:45:42 ] |
| Post subject: | Re: Need advice on Motor pinion on T4 2014 with stock spur |
that really helpful |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|