XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Foams https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18671 |
Page 1 of 1 |
Author: | andrewd [ Sun May 25, 2014 22:56:52 ] |
Post subject: | Foams |
I am running rubbers at my local club which are sorex 28s and would like to try foams any advice which ones and a setup |
Author: | beale [ Sun May 25, 2014 23:33:59 ] |
Post subject: | Re: Foams |
Unless everyone runs foams I wouldn't bother we have just about outlawed them at the local clubs and everyone is achieving good set ups and if anything quicker on rubber. From my last experience if you are determined Front diff with thinnish oil 42sh front 37sh rear worked at most places |
Author: | sonic2 [ Thu May 29, 2014 09:46:36 ] |
Post subject: | Re: Foams |
The club I race at must be one of the last in the UK that still race foam tyres in most classes of racing. We have found the Enetti Tyres to work well for us, 42shore front, 40 shore rear. Or if you can't get those, some guys use CONTACT foam tyres (distributed by Schumacher). Sorry if that's a swear word on this forum A popular choice is 30mm rear tyre, 26mm front. (Although fitting 30mm rear can be a problem on the t4, you'll need wider hexes) 6mm tends to work. As per above info, yes we run a front diff on a small track, I use 40,000 front oil, 3,000 rear. Hope that helps |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |