XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Steering Center Problems https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18662 |
Page 1 of 1 |
Author: | JohnNgSF [ Mon May 19, 2014 08:26:51 ] |
Post subject: | Steering Center Problems |
I am having problems getting the steering centered on my T4-2013. I don't think it's the servo or the servo saver. I can't get the steering to line up straight consistently, when I have it on the setup board. Solutions anyone? |
Author: | greyhead [ Mon May 19, 2014 09:47:25 ] |
Post subject: | Re: Steering Center Problems |
check for binding in the steering,is your servo ok? have any teeth been damaged causing it to not center,steering sytems generally have a small amount of slop |
Author: | sonic2 [ Thu May 22, 2014 11:30:00 ] |
Post subject: | Re: Steering Center Problems |
Check the two ball joints that attach to the inner links of the steering toe rods. Sometimes they work loose, or the 3rd ball joint on the same steering arm assembly. Use a tiny amount of threadlock if they have worked loose. |
Author: | Lonestar [ Thu May 22, 2014 12:44:30 ] |
Post subject: | Re: Steering Center Problems |
check: -servo arm (stripped splines? right count?) -stripped ballstuds that move slightly -servo mounted tight on servo mounts |
Author: | greyhead [ Fri May 23, 2014 17:52:25 ] |
Post subject: | Re: Steering Center Problems |
one other thing to add which has happened on other cars,and that is when making up the turnbuckles it can be screwed in to far and bind on the ball stud when fitted,another cause of binding |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |