[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 561: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 611: sizeof(): Parameter must be an array or an object that implements Countable

XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/
Reduce turn the servo ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18653	Page 1 of 1

---

Author:	CineQ [ Tue May 13, 2014 13:12:26 ]
Post subject:	Reduce turn the servo ?
I mean in modified class factory driver reduce servo turn ? EPA or Dual Rate form 100% to for examlpe 60%

---

Author:	Hagberg [ Tue May 13, 2014 23:41:39 ]
Post subject:	Re: Reduce turn the servo ?
We set the EPA so that the center piece of the steering is just touching the steering arms.

---

Author:	CineQ [ Wed May 14, 2014 12:17:43 ]
Post subject:	Re: Reduce turn the servo ?
But you dont decrease servo steering ?

---

Author:	Longlander [ Wed May 14, 2014 12:46:09 ]
Post subject:	Re: Reduce turn the servo ?
EPA will limit steering servo.

---

Author:	Skiddins [ Wed May 14, 2014 15:19:14 ]
Post subject:	Re: Reduce turn the servo ?
Everyone sets the EPA to just off full lock, to stop the servo from straining against the stops. Some drivers then use the dual rate to reduce the lock on carpet etc to 70-80%. It's best to try and drive with 100% and don't use full lock.

---

Author:	Lonestar [ Fri May 16, 2014 10:03:53 ]
Post subject:	Re: Reduce turn the servo ?
Pros don't use d/r... they have fingers

---

Author:	sonic2 [ Mon Jun 02, 2014 10:51:52 ]
Post subject:	Re: Reduce turn the servo ?
On T4 '13 I have to reduce end points to 81% left and right or the steering aseembly will not go further. Does this sound correct? I think this is a standard feature.

---

Page 1 of 1	All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/