XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Intial Steering https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18596 |
Page 1 of 1 |
Author: | Skiddins [ Wed Mar 12, 2014 03:00:35 ] |
Post subject: | Intial Steering |
What would any of you change to gain better initial steering? From mid corner to exit my car is very good, but it seems to lack the initial turn in. I have tried stiffer rear springs and thinner front roll bar etc. which has helped, but I'm always trying to eek out that little bit more. I have also tried more aggressive bodyshells, but these just seem to make the rear less predictable instead of giving me more aggressive steering. Would 50 or 52mm driveshafts at the front be preferable? Do you have any suggestions? Thanks Skiddins |
Author: | phillip46 [ Thu Mar 13, 2014 22:53:05 ] |
Post subject: | Re: Intial Steering |
Hi .some help please.i dont know if its the same but i need more steering going into the turn.when i touch the brake it turns sharper but loose to much speed.need more turn in of power but not baking if that makes sense.eny help please |
Author: | DaleBurr [ Fri Mar 14, 2014 14:45:34 ] |
Post subject: | Re: Intial Steering |
Indoors or out? I was lucky enough to get a day of dry running outdoors and found the '14 to have shed loads of steering, loads more than the '13 did, but with the rear end still stable enough. That was on full kit setup with 2.7s all round. Do you have a setup sheet for where you are at the moment? |
Author: | Longlander [ Fri Mar 14, 2014 14:46:01 ] |
Post subject: | Re: Intial Steering |
Post your setup Phillip46. |
Author: | phillip46 [ Fri Mar 14, 2014 16:38:16 ] |
Post subject: | Re: Intial Steering |
Hi.i did a setup sheet under phillip46.do not know how to move it here.please have a look .thanks |
Author: | Skiddins [ Fri Mar 14, 2014 19:38:01 ] |
Post subject: | Re: Intial Steering |
Here's his sheet; |
Author: | Skiddins [ Fri Mar 14, 2014 19:51:57 ] |
Post subject: | Re: Intial Steering |
Author: | Jampot [ Sat Mar 15, 2014 12:12:39 ] |
Post subject: | Re: Intial Steering |
Gear diff in the front is suppose to help initial, Also the progressive springs but I believe u have tried those? I've been testing with weigh and more weight forward helps initial turn in. Depending on how far u wanna go but reducing ur castor gives more initial less mid n exit |
Author: | greyhead [ Mon Mar 17, 2014 22:19:09 ] |
Post subject: | Re: Intial Steering |
how did you get on with this on sunday? last year when i ran the 13 at wlrc i had really good steering ,but discovered it right at the end of the meeting,on the front ff i ran 1mm but on the fr i ran 0.5mm and 50mm shafts incase of any bind,plus a 1mm shim under the fr,arm mounts were on the middle setting,ill try a revised version for the 14 at the btcc or clubmans |
Author: | phillip46 [ Mon Mar 17, 2014 23:54:39 ] |
Post subject: | Re: Intial Steering |
Hi.i did not race this weekend but will do come sunday.i changed rear tow and 1 mm ackerman.was wondering if the shock oil shoud be a bit harder deu to the bumps. |
Author: | greyhead [ Tue Mar 18, 2014 00:52:25 ] |
Post subject: | Re: Intial Steering |
Author: | Skiddins [ Tue Mar 18, 2014 00:53:49 ] |
Post subject: | Re: Intial Steering |
Author: | greyhead [ Tue Mar 18, 2014 01:05:00 ] |
Post subject: | Re: Intial Steering |
Author: | morgoth [ Tue Mar 18, 2014 11:19:38 ] |
Post subject: | Re: Intial Steering |
Try more droop. Especially if you running 6mm ride height. You can also go down to 3.5mm on the rear hub. This gives a lot more turn in. And maybe 2.5* rear toe if it's stable enough. |
Author: | grippgoat [ Sun Mar 23, 2014 00:40:50 ] |
Post subject: | Re: Intial Steering |
Skiddins, have you tried thicker front shock oil? That's my magic bullet when I want more initial steering without affecting anything else too much. -Mike |
Author: | Skiddins [ Sun Mar 23, 2014 01:19:22 ] |
Post subject: | Re: Intial Steering |
Author: | ReeceH [ Mon Mar 24, 2014 00:36:24 ] |
Post subject: | Re: Intial Steering |
Skiddins have you tried the 1 piece rear suspension and the split blocks in the FR position yet? |
Author: | Skiddins [ Mon Mar 24, 2014 11:26:36 ] |
Post subject: | Re: Intial Steering |
Author: | Hagberg [ Tue Mar 25, 2014 19:17:36 ] |
Post subject: | Re: Intial Steering |
Remove ackerman shims Harder front spring Front spool instead of diff Front shocks more stood up 2 deg front c-hub |
Author: | sonic2 [ Thu Apr 10, 2014 10:21:39 ] |
Post subject: | Re: Intial Steering |
Would a slightly wider front hex help turn in? 1mm more? |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |