XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Low bite carpet, T3'12, question for Alex https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18567 |
Page 1 of 1 |
Author: | Maeg [ Mon Feb 17, 2014 08:51:18 ] |
Post subject: | Low bite carpet, T3'12, question for Alex |
Hello, Alexander! Recently I found you post about set-up for X12 and low bite carpet At this weekend try it - damn, it works perfect, thank you very much! But now I have problem with my T3'12 on that carpet. I use sweep exp30evo carpet tyres. Front springs 2.8, stab - 1.4, downstop 6. Rear springs 2.4, stab 1,2, downstop 4. My car too nervous, I can't handle it yet. I try to get more rear grip with getting rear stab off - it works, but now car have very big under steer at corner entry without acceleration. I use front spool. Could you get some advise - how can I get better balance for my car? |
Author: | Hagberg [ Mon Feb 24, 2014 22:28:44 ] |
Post subject: | Re: Low bite carpet, T3'12, question for Alex |
Try a 1.3 or 1.4 rear stabilizer to make the car less nervous! We did this all the time for the T3'12 |
Author: | Maeg [ Tue Feb 25, 2014 08:16:01 ] |
Post subject: | Re: Low bite carpet, T3'12, question for Alex |
Alexander - this T3 specific or why? I always consider that I need softer rear, to get more stable and higher traction at rear. May be I'm wrong in my thinking about setting up suspension? |
Author: | beale [ Tue Feb 25, 2014 22:11:28 ] |
Post subject: | Re: Low bite carpet, T3'12, question for Alex |
You can roll too much and lose traction. It works I had same issue with my 12, running 2.4 rear springs I stood the shocks up and used 1.4 ARB on 2.6 rears it was settled on the 1.3 but sometimes lacked rotation so then I would drop to 1.2 and or lay shocks down a hole. |
Author: | Hagberg [ Mon Mar 10, 2014 16:44:28 ] |
Post subject: | Re: Low bite carpet, T3'12, question for Alex |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |