XRAY - Model racing cars

Hi Olly,i was at newbury last night and struggled all night ,have you got a set up posted that i could take a look at,i was in blinky and i couldnt get the rear to stick enough to attack the corners,i ran 2.5 rear toe but i manage elsewhere with it so doubting thats the issue
it didnt have masses of steering but off power it would slide too easy

Use the setup sheet search and put 'Olly' in for the driver name; you will find a Newbury one.

Hey,

I have a couple of set ups posted up and one is from newbury with sorex 28s, its very similar
to alex set up as this is what I started with.

To help rear end stability here are a few things I would recommend from my set up.

stand up rear shock to hole 3
1.6mm topdeck
2 rear camber 1.5 front
Outer hole on rear hub camber link position
gear diff up front can help but it's more track dependent but worth a try. 1 million cst hudy oil would be a good start.

Hope this helps.

Oj

What are the different benefits of the diff in up and down positions

Hey,
This is something I have not yet tested so cant give you an answer unfortunately, still need to test more and learn the car better

Im sure Alex would of tested this so he can probably give you an answer.

Oj

thanks oj and dale