| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Outer front camber links https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18546 |
Page 1 of 1 |
| Author: | andrewd [ Thu Jan 30, 2014 00:31:05 ] |
| Post subject: | Outer front camber links |
I have noticed that on both my front outer camber links the ball cup has been rubbing on the rim off the wheel I have been running kit with the 2mm washer Any thoughts as I have checked with manual and seem all ok |
|
| Author: | greyhead [ Thu Jan 30, 2014 02:14:10 ] |
| Post subject: | Re: Outer front camber links |
skiddins came up with the idea of using the open ball ends from the steering rods,they are lower and allow for a 3mm shim to be used,or you can just file down the standard ones,but its nothing to worry about |
|
| Author: | brano [ Thu Jan 30, 2014 06:50:13 ] |
| Post subject: | Re: Outer front camber links |
Yes, you can use the open #3026663 ball joints instead of the #302665 closed ball joints that are rubbing on the rims. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|