XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T2 007 for young racer https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18544 |
Page 1 of 1 |
Author: | Bikerbob [ Wed Jan 29, 2014 04:56:36 ] |
Post subject: | T2 007 for young racer |
Looking to pick this up for my 8yO son. Need to run a Reedy 5000 lipo in it. I dont see anything in the manual that shows topbrace height - but I have read a lot that say this could be an issue. Its rubber on carpet, so chassis stiffness is not an issue, lipos now are weighted pretty good, so not sure I want to put one of those brass trays in. Anything I need to consider - or anything I can still get that would help me with getting this running with a std HC lipo? James |
Author: | beale [ Wed Jan 29, 2014 08:57:57 ] |
Post subject: | Re: T2 007 for young racer |
You may be ok with a 5000 pack but anything bigger would foul the top deck. I have aT2 009 with Lipo conversion which is basically the front and rear pieces of a top deck placed under the actual top deck as spacers, wouldn't be too hard to make if not still available, would advise some retainers T3/4 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |