XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Play in the 20T center pulley https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18523 |
Page 1 of 1 |
Author: | aaron.k.isaac [ Thu Jan 16, 2014 17:12:44 ] |
Post subject: | Play in the 20T center pulley |
Hi Guys, Is there a way to eliminate the play that's apparent in the 20T center pulley? Or is it part of the design? Thanks a million |
Author: | Skiddins [ Thu Jan 16, 2014 20:54:44 ] |
Post subject: | Re: Play in the 20T center pulley |
I've never worried that much, but if you want to remove it, try putting a small piece of Blu-Tac or some Shoe-Goo in the slot where the pin goes |
Author: | aaron.k.isaac [ Sat Jan 18, 2014 05:06:09 ] |
Post subject: | Re: Play in the 20T center pulley |
I never had this feature/issue, only on the Xray. Are factory drivers running their cars with the slop too? Thanks everyone |
Author: | Skiddins [ Sat Jan 18, 2014 14:26:54 ] |
Post subject: | Re: Play in the 20T center pulley |
Most driver I know just ignore it |
Author: | Nikos Georgiadis [ Tue Jan 21, 2014 10:54:59 ] |
Post subject: | Re: Play in the 20T center pulley |
Hello aaron.k.isaac Don't worry about that. It's normal to have a small play after some batteries... |
Author: | Hagberg [ Tue Jan 21, 2014 21:52:16 ] |
Post subject: | Re: Play in the 20T center pulley |
If you are concerned about the clicking noise, try to add Hudy graphite grease to the pins so that they don't move around inside the pulley. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |