Play in the 20T center pulley

aaron.k.isaac · **Joined:** Thu Nov 21, 2013 20:06:08 **Posts:** 2

Hi Guys,

Is there a way to eliminate the play that's apparent in the 20T center pulley? Or is it part of the design? Thanks a million

Skiddins · **Posted:** Thu Jan 16, 2014 20:54:44

I've never worried that much, but if you want to remove it, try putting a small piece of Blu-Tac or some Shoe-Goo in the slot where the pin goes

aaron.k.isaac · **Joined:** Thu Nov 21, 2013 20:06:08 **Posts:** 2

I never had this feature/issue, only on the Xray. Are factory drivers running their cars with the slop too? Thanks everyone

Skiddins · **Posted:** Sat Jan 18, 2014 14:26:54

Most driver I know just ignore it

Nikos Georgiadis · **Posted:** Tue Jan 21, 2014 10:54:59

Hello aaron.k.isaac

Don't worry about that. It's normal to have a small play after some batteries...

Hagberg · **Posted:** Tue Jan 21, 2014 21:52:16

If you are concerned about the clicking noise, try to add Hudy graphite grease to the pins so that they don't move around inside the pulley.

XRAY - Model racing cars