| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Layshaft bulkheads https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18492 |
Page 1 of 1 |
| Author: | andrewd [ Mon Dec 30, 2013 00:09:41 ] |
| Post subject: | Layshaft bulkheads |
I have just finished building the layshaft on my T4-14 and as per kit have the closed bulkheads so with these what is the best way of changing a spurgear as I take it you have to remove top deck and the bulkhead opposite the motor to remove the layshaft. So with this in mind is it worth it or more benifical to purchase the open cup layshaft bulkheads and just remove the topdeck only when wanting to change the spur |
|
| Author: | greyhead [ Mon Dec 30, 2013 00:28:37 ] |
| Post subject: | Re: Layshaft bulkheads |
its not as bad as i thought it was going to be,its only 2 more screws also it depends on whether or not you want to use the flex option anyway |
|
| Author: | Hagberg [ Wed Jan 01, 2014 22:29:54 ] |
| Post subject: | Re: Layshaft bulkheads |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|