| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| A few questions about suspension holders T4 '13 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=18472 |
Page 1 of 1 |
| Author: | EPicLURcher [ Thu Dec 19, 2013 19:29:07 ] |
| Post subject: | A few questions about suspension holders T4 '13 |
Hi all How do i tell what roll center piece am i running. I seem to have gotten them mixed up. Also the manual says that the arms need to move freely-they move without binding, but do they need to fall back when I let go? They dont do that. Thanks |
|
| Author: | greyhead [ Thu Dec 19, 2013 21:57:12 ] |
| Post subject: | Re: A few questions about suspension holders T4 '13 |
if you lay the mounts on a table it will become obvious which is which,youll have the standard center hole and then 2 different ones which will be -075 and +075 from center,and yes they should drop back freely,if there binding slightly try tapping the arm forward with a hex handle where the shock mounts to it this should help free them up,other wise its trial and error when tighten the mounts |
|
| Author: | Skiddins [ Fri Dec 20, 2013 02:28:01 ] |
| Post subject: | Re: A few questions about suspension holders T4 '13 |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|