| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T1 Rear Hops during 180deg corners https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1837 |
Page 1 of 1 |
| Author: | fooyukvoon [ Sun Jun 19, 2005 13:45:10 ] |
| Post subject: | T1 Rear Hops during 180deg corners |
| Author: | Steve [ Mon Jun 20, 2005 10:22:20 ] |
| Post subject: | |
| Author: | AL [ Mon Jun 20, 2005 11:39:50 ] |
| Post subject: | |
| Author: | fooyukvoon [ Mon Jun 20, 2005 17:08:57 ] |
| Post subject: | |
| Author: | teamgp [ Mon Jun 20, 2005 18:08:17 ] |
| Post subject: | |
| Author: | fooyukvoon [ Mon Jun 20, 2005 18:18:51 ] |
| Post subject: | |
| Author: | teamgp [ Mon Jun 20, 2005 18:23:16 ] |
| Post subject: | |
| Author: | fooyukvoon [ Tue Jun 21, 2005 03:10:34 ] |
| Post subject: | |
| Author: | 1jag8 [ Tue Jun 21, 2005 03:36:49 ] |
| Post subject: | |
| Author: | teamgp [ Tue Jun 21, 2005 14:10:38 ] |
| Post subject: | |
| Author: | Team X-Ray NZ [ Thu Jun 23, 2005 12:22:02 ] |
| Post subject: | |
| Author: | ben [ Thu Jun 23, 2005 13:20:20 ] |
| Post subject: | |
| Author: | teamgp [ Thu Jun 23, 2005 15:10:16 ] |
| Post subject: | |
The inserts accomplish this by not allowing the rubber bladder to compress much and reduce the pressure inside the chamber. |
|
| Author: | fooyukvoon [ Sun Jun 26, 2005 15:04:18 ] |
| Post subject: | |
Finally tested the settings again today. The car still hops about at corners.  Tested my XXX-S which has Shocks that cannot be built with rebound, and it was much better than the X-Ray T1. What gives? So, now I am going to try rebuilding the shocks with as little rebound as possible. Think it'll work? Anyone?
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|