XRAY - Model racing cars

Sorry for no detail.I mainly wanted to know what tyre is the most popular eg take off, sorex....Im trying to choose a fast tyre but i dont know what i should choose the temp will be arond 35-40 degrees.I have the most experience with take off 27's.

Andreas,
What inserts and rims would you recomend as a starting point with take off CS27 tyres on a medium to high traction track which is normally used for 1/5 scale gas cars so it is quite large.

thanks
Josh

Hi xdriver,

If the grip is good I would recommend that you us, white springs front and rear. 1,5 degree camber front and 1 degree rear. I would start with the front shocks in the 4:th hole and the rear in the upper or second most upper one. Also using the steering links in the forward positions, maybe also considering using about 1-3 degrees toe out front for extra steering in the tight parts of the track.

Castor, you have to test for your self but try in this order.

0 kick up/middle holes--3 caster blocks

1.5 antidive/lower hole front, middle rear---3 caster blocks.

0 kick up/middle holes---0 caster block.

Some of these should be good.
less caster for tighter turns.

start with this and test some then report back.

Best regards
Andreas Myrberg

hi andreas,

thanks a lot for your setup tips, you wrote the orange xenon inserts
with hard xray wheels are for most conditions the best,
should i use them also on indoor carpet?

thx again ,
best regards

No, the Xenons are for aphalt racing, for carpet racing you should use JB blue ones, try both 2 piece and 1 piece inserts. Wheel most of the time you should use the Xray hard wheel but in very low grip conditions try a medium or soft.

Best regards
Andreas Myrberg

next week i will test it, great!
thx for your help!
best regards

thx for help andreas

Hi, Andreas what body shell would u recomend and also wat stock motor would u recommend if u know anything about them ?

thanx