There is nothing as frustrating as glitching........
Couple of suggestions (not from experience
:
- Move the antenna to the upperdeck and put a (thick) plastic spacer between the deck and the antenna holder. Don't forget to 'sink' the screw. Otherwise it thouches the belt.
- Use the whole antenna wire from the receiver. Extend the antenna tube as long as possible.
- Keep the antenna wire as far away as possible from carbon parts.
- Change cristals, maybe one is broken.
- Is the antenna on the transmitter stable if pulled fully.
- Lower the driving frequency of your ESC (more punch, lower amount of pulses per second)
- Try an other motor.
- Try less timing on your motor.
- Try an other ESC.
- Try an other servo.
- Are receiver and transmitter working good together. They can have a 'communication' problem due to tolerances.
- Try an other receiver / transmitter.
Good luck.
(I ended up using PCM
)