XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Rear camber links binding https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1751 |
Page 1 of 1 |
Author: | teamgp [ Mon Jun 06, 2005 21:40:51 ] |
Post subject: | Rear camber links binding |
All, Does everyone else have the same problem with the outer camber link ball end binding when the inner mount point is at the bottom outside setting? I had this problem with my fk04 and see the same thing with my new fk05. The arms will move upwards for about 3 to 4 mm of travel until the little hollow ball reaches max rotation inside the plastic end. With my 04 I changed the outer links to the T1R ball cups and haven't had any problems with pop offs and such and the upward arm travel is now 10+mm. I've already switched the outer ends on the 05, but was wondering if anyone had other tips to make the stock outer ends work. Thx. |
Author: | John Thornhill [ Wed Jun 08, 2005 16:23:04 ] |
Post subject: | Re: Rear camber links binding |
Author: | teamgp [ Wed Jun 08, 2005 17:20:46 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |