XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
RollCentre height effect by chassis thickness https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1736 |
Page 1 of 1 |
Author: | Zenkins [ Fri Jun 03, 2005 03:13:26 ] |
Post subject: | RollCentre height effect by chassis thickness |
Hi all, This is my first post in Xray forum sinice I got my FK05. Very happy on the car and the support on this forum. ![]() I have a question on roll centre height regarding on changing of the bottom chassis. Say like if I changing from 2.5mm to 3.0mm thicker chassis, will the roll centre height also be higher? If so, if I mount the suspension blocks to the lowest hole front/rear when I using 3mm chassis, will that make the roll centre height back to standard? Cheers Zenkins |
Author: | Alex Stocker [ Fri Jun 03, 2005 10:41:48 ] |
Post subject: | |
Author: | Zenkins [ Sun Jun 05, 2005 16:37:03 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |