XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
A little question, and a help for T1-Fk 04 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1718 |
Page 1 of 1 |
Author: | DavidLopes [ Mon May 30, 2005 20:15:58 ] |
Post subject: | A little question, and a help for T1-Fk 04 |
Hi, i want to ask if any body here has tried the 1.5 c-hubs?? i'm asking these because my car in the fast corners, the front is a little bit slow to enter the corner for the car not go wide, i have to take a lot of acelarator to the car enter the corner. I will be apreciated if any body helped me ![]() |
Author: | Tonyv [ Mon May 30, 2005 21:06:24 ] |
Post subject: | |
David, I never tried the 1.5 caster blocks on the 04, but have often used 3 degree caster blocks in combination with 1.5 degree anti-dive (front arms angled down towards the front) to get 1.5 degree caster. Works very well on the 04 although you can have some problems with understeer on corner exit on tight fast corners. I've also occasionally used zero degree caster blocks (alu) with zero anti-dive and I know the Myrbergs have occasionally used 3 degree blocks with 3 degree anti-dive to get zero effective caster. Generally the 04 likes caster angles between 0 and 3 degrees (rubber tyres) while the 05 seems to shine the most with 4.5 degrees sofar. |
Author: | DavidLopes [ Tue May 31, 2005 22:55:55 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |