XRAY - Model racing cars

The original had pivot suspension. If it is the FOC-version, it has pivot and C-hub suspension. It's also possible that the car is converted to C-hubs suspension.
In all these cases its very likely that with the C-hubs the car will have 'long' suspension arms, as on your T1R.
The will have standard C-hub suspension with 'short' arms and lighter (silver colored) bulkheads.

ok thnx! so i have the normal evo2, because i have pivot ball and the "brown" bulkheads.

so to convered my evo2 to fk i need:

the silver collered bulkheads ( what i can use from my t1r? )

and the c hub suspension ( also from my t1r, but is it better to use the short arms? )

Short arms give a more responsive car.
But my opinion is that: you don't need to buy anything.
Because the C-hub suspension from your T1R fits perfectly on the EVO2 bulkheads.
You can always (in a later stage) convert your car to short arms.

But if your aiming to copy a FK'04 you have to do a lot more. Because the bulkheads, arms, axels, pivot holders and pins, etc. are different.

Make one step at the time I would suggest.

I made three steps in 2 months and ended up with 2,5 cars

ok very thnx!

i wanted to make from 2 cars 1 good one, so i puth the c hub on my evo2.

should i put the lighter bulkheads also on it?

greetz marco

better idea take the chasis from the evo2 and put it on the t1r along with the shock towers and upper deck, an dwhatever other hop ups the evo might have, less work that way!! cheers.