XRAY - Model racing cars

Hi Dan,

you could try this . It is using the new system (FK05) but it is supposed to record a T1R set up. The key things are that it is a spool based set up and it rocked. I have got the 1.77 low ratio internals on my T1R - I don't know many people now who haven't. Also I am running the short arms all round. You can download a manual from

Hope this helps

Rob

Hi
There is no big difference between 2,125 and 1.77. But if you like to run Stock as well, it coudnt be wrong to switch to 1,77.
Also the drivetrain gets a little bit more efficient because of the larger pullys on the middle shaft.

You can´t just take a setup from an FK´05 or FK´04 because the T1R has long arms.
It´s possible to convert the racer to the short arms, but for the beginning they are good enought.
About Setup:
Try the following.
Front Suspension
Roll Center holders down.
Shocks: 30 oil Xray with 3 holes open
Spring: for the beginning take the blue one from the rear.
2mm shim under the front upper camber link

Rear:
Roll Center holders in upper position
Shocks: 30 oil Xray with 3 holes open
2mm shim under the camber link
Shocks 2nd hole from the potside on the shock tower
and the middle hole on the arms.
Try to get a white Xray spring for the rear.

The rest like it is in the manual
Body: I would suggest a Protoform Mazda 6 or a dodge 3
ALex