XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
New to 1/10th TC Racing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1623 |
Page 1 of 1 |
Author: | mpetrich [ Mon May 16, 2005 17:31:00 ] |
Post subject: | New to 1/10th TC Racing |
Author: | G30RGE [ Mon May 16, 2005 17:36:40 ] |
Post subject: | |
Author: | teamgp [ Mon May 16, 2005 17:45:55 ] |
Post subject: | |
Author: | mpetrich [ Mon May 16, 2005 17:50:44 ] |
Post subject: | |
Author: | teamgp [ Mon May 16, 2005 17:59:37 ] |
Post subject: | |
Author: | mpetrich [ Mon May 16, 2005 18:06:32 ] |
Post subject: | |
Author: | teamgp [ Mon May 16, 2005 22:36:51 ] |
Post subject: | |
Author: | apexracing [ Tue May 17, 2005 18:29:57 ] |
Post subject: | |
Author: | Tonyv [ Tue May 17, 2005 20:13:14 ] |
Post subject: | |
Author: | teamgp [ Tue May 17, 2005 21:37:50 ] |
Post subject: | |
If they are running the same springs they used with the 04, then it will probably lift one or both wheels as well. The 05 has a lot less weight swinging away from the centerline and therefore needs less spring rate to allow the car to roll the same amount as an 04. If its not rolling and dipping down, then the only other direction for the weight to move, due to traction forces, is up. |
Author: | apexracing [ Tue May 17, 2005 23:15:51 ] |
Post subject: | |
that makes sense they went with harder springs then there 04's they are going the wrong way then, tony we run foam tires very high grip. they have leaned in there shocks, i will mention the less droop idea! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |